-
×
SMART LOADs FOR AUTOMOTIVE LED 4-way , 24 volt
1 × $89.00
Subtotal: $89.00
- AIO 2.0 sensor
- Low Voltage Disconnect (LVD) 12v – 10A
- Low Voltage Disconnect (LVD) 24v – 1A
-10%
Smart Led Load Resistor
ELECTRONIC LOADs FOR AUTOMOTIVE LED INDICATOR LIGHT 2-way , 12 volt
Availability:
Available on backorder
Electronic smart module for load simulation and fix failure control of LED Turn Signal Error
The not heated Smart load module for LED (replacing standard LED load resistor)
PRODUCT SPECIFICATION:
- Fixes error messages caused by the on-board computer after replacing incandescent light bulbs with LEDs
- The computer will properly detect LED functionality
- Smart module is not heated(Unlike existing load devices) and does not require additional cooling equipment
- There is a two-channel(two-way) module for replacing the right and left turn signal of a car and a 4-channel module (for buses and trucks)
- Reduces the likelihood of vehicle battery discharge when lights are left on(Unlike existing load devices)
$89.00 $99.00
Available on backorder
When incandescent light bulbs are replaced by LEDs in the headlights of the car, vehicle On-Board Computer generates error because that LEDs consume less power. Additional to this error, the frequency of the turn signal is increased. To correct operation of the On-Board Computer or to prevent incorrect work of relays, we have to simulate a load equal to incandescent bulbs. Usually used for this purpose “LEDs load resistors” and “Dummy resistors“.
But those solutions have several serious disadvantages such as – inability of the On-Board Computer to detect LED’s failure due to load resistor and the overheating of the load resistors.
When light bulbs are replaced by LEDs in the headlights of the car, vehicle Computer generates error because that LEDs consume less power. Additional to this error, the frequency of the turn signal is increased.
DC input voltage 12V
Maximum Load 21W X 2 channel
Weight 100g
Dimensions 80x60x20 mm
Warranty 2 years
Based on 0 reviews
Be the first to review “ELECTRONIC LOADs FOR AUTOMOTIVE LED INDICATOR LIGHT 2-way , 12 volt”
Related products
-
Smart Led Load Resistor
Low Voltage Disconnect (LVD) 12v – 10A
This battery guard will automatically disconnect any load and appliances connected through it when the battery voltage goes below a low voltage threshold, and it will also disconnect the appliances if the voltage is too high or the current exceeds 10A
Low Voltage Disconnect (LVD) Features:
- Disconnects battery at pre-set voltage
- Stops battery damage due to excessive discharging
- Reconnects battery once power is restored
- Measurement accuracy: ± 0.05 volts
- Calibrate and change disconnection and connection voltages with the laboratory voltage supplier.
- Compact, lightweight and easy to install
- Protection against polarity reversal
SKU: EL1012 -
Smart Led Load Resistor
SMART LOADs FOR AUTOMOTIVE LED 4-way , 24 volt
Electronic smart module for load simulation and fix failure control of LED Turn Signal Error
The not heated Smart load module for LED (replacing standard LED load resistor)
PRODUCT SPECIFICATION:
- Fixes error messages caused by the on-board computer after replacing incandescent light bulbs with LEDs
- The computer will properly detect LED functionality
- Smart module is not heated(Unlike existing load devices) and does not require additional cooling equipment
- There is a two-channel(two-way) module for replacing the right and left turn signal of a car and a 4-channel module (for buses and trucks)
- Reduces the likelihood of vehicle battery discharge when lights are left on(Unlike existing load devices)
SKU: SLM42124 -
Smart Led Load Resistor
SMART LOADs FOR FIX AUTOMOTIVE LED TURN SIGNAL ERROR – 4-way , 12 volt
Electronic smart module for load simulation and fix failure control of LED Turn Signal Error
The not heated Smart load module for LED (replacing standard LED load resistor)
PRODUCT SPECIFICATION:
- Fixes error messages caused by the on-board computer after replacing incandescent light bulbs with LEDs
- The computer will properly detect LED functionality
- Smart module is not heated(Unlike existing load devices) and does not require additional cooling equipment
- There is a two-channel(two-way) module for replacing the right and left turn signal of a car and a 4-channel module (for buses and trucks)
- Reduces the likelihood of vehicle battery discharge when lights are left on(Unlike existing load devices)
SKU: SLM42112 -
Smart Led Load Resistor
SMART LOADs FOR AUTOMOTIVE LED 2-way , 24 volt
Electronic smart module for load simulation and fix failure control of LED Turn Signal Error
The not heated Smart load module for LED (replacing standard LED load resistor)
PRODUCT SPECIFICATION:
- Fixes error messages caused by the on-board computer after replacing incandescent light bulbs with LEDs
- The computer will properly detect LED functionality
- Smart module is not heated(Unlike existing load devices) and does not require additional cooling equipment
- There is a two-channel(two-way) module for replacing the right and left turn signal of a car and a 4-channel module (for buses and trucks)
- Reduces the likelihood of vehicle battery discharge when lights are left on(Unlike existing load devices)
SKU: SLM22124
There are no reviews yet.