Industrial Battery Monitoring Unit
Available on backorder
Monitoring options: battery array up to 2000 AH and 6V to 48V.
BMU Technical Data:
Optional battery type: Acid Lead, Gel, AGM
Battery Voltage: 6V to 48V
Measuring (sampling rate) intervals: can vary from a few minutes to a few days
Device dimensions: 60X120X160 mm
Weight: 350 gr
Operating Temperature: -20°C to +80°C
BMU possible indications:
Battery state of charge.
Battery state of life.
Malfunction of battery charger.
Malfunction of battery connections.
Environmental issues indicators such as temperature and humidity.
$289.00 $299.00
Available on backorder
CompareMany critical industrial and defense systems use a battery array as an alternative source of energy in an emergency situation. The BMU is a unique system, designed to continuously monitor the battery array and ensure it’s functioning at any time.
BMU industrial device main properties:
Continuous Real-time battery monitoring (for a single battery or a battery array)
Battery parameters are measured automatically
– No need to disconnect the batteries or the charger.
Various indications for battery malfunction are possible – per customer needs.
BMU industrial is a microcomputer-based system – allowing many types of data output
| Weight | 23 kg |
|---|---|
| Dimensions | 12 × 23 × 56 cm |
| Color | Green, Indigo |
| Size | Extra Large |
Based on 0 reviews
Be the first to review “Industrial Battery Monitoring Unit”
Related products
-
DC-DC convertor and regulator
DC-DC convertor and regulator
• Electronics DC-DC converter and regulator solves power supply problems for vehicles with high-demanding electrical consumers (up to 300A energy balance).
• The product has dual output of 24V and 12V.
• The product can supply output up to 300A at 24V.
• The product has small form-factor and is very light (0.5 kg)
• The product has a built-in microcontroller and an advanced circuitry to allow maximum efficiency and minimal heating.SKU: 654613612 -
Industrial Battery Monitoring Unit
Telecom Battery Monitoring Unit
BMU Technical Data:
Optional battery type: Acid Lead, Gel, AGM
Battery Voltage: 6V to 48V
Measuring (sampling rate) intervals: can vary from a few minutes to a few days
Device dimensions: 60X120X160 mm
Weight: 350 g
Operating Temperature: -20cel to +80celSKU: bmu03 -
battery management system, Car battery tester
Car battery tester
Comparative Advantages of BMU Device:
- The BMU Device can be connected constantly to high capacity array of batteries (up to 1000 amperes-hour).
- The BMU Device has a low-level of energy consumption.
- The Device is relatively small in size (35 mm.x85 mm.x35 mm.).
- The results can be transmitted through an RS232 telecommunication system.
- The users consider it friendly because of its simplicity.
- The BMU Device has a correction factor, derived from the environment temperature.
- The BMU Device allows wide variability of the test frequency.
SKU: BMU01
There are no reviews yet.