The not heated Smart load module for LED (replacing standard load resistor)
Usually when replacing ordinary lamps in cars with LEDs, used for this purpose “LEDs load resistors” or as they are also called “Dummy resistor“.
But those solutions have several serious disadvantages such as – inability of the On-Board Computer to detect LED’s failure due to load resistor and the overheating of the load resistors.
Electronic smart module for load simulation and failure control of LED indicators.
Our smart module for LED indicators was developed through many years of experience supplying electronic devices to manufacturers and users of vehicles, buses, coaches and trucks.
When an incandescent lamp in a turn signal indicator is replaced by an LED, several problems occur. specification:
The first problem is over flashing.
The second problem is error generation from the on-board computer
This is caused by the lower power consumption of LEDs. To correct the operation, the user has to simulate a load equal to the load of incandescent bulbs. Usually for this purpose, LED load resistors, dummy resistors or LED load controllers would be used.
These resistor-based solutions have several serious disadvantages, such as the inability of the on-board computer to detect LED indicator failures due to the use of load resistors.
Another disadvantage is overheating of the load resistors, which in many cases requires an alternative solution, such as the installation of powerful radiators on the body of the vehicle.

Features:
• Fixes error messages caused by the on-board computer after replacing incandescent light bulbs with LEDs
• Prevents hyper flashing of turning signals
• The computer will properly detect LED functionality
• Smart module is not heated(Unlike existing load devices) and does not require
additional cooling equipment
• There is a two-channel(two-way) module for replacing the right and left turn signal
of a car and a 4-channel module (for buses and trucks)
• Reduces the likelihood of vehicle battery discharge when lights are left on(Unlike
existing load devices)
• Lower energy consumption
• Compact, lightweight and easy to install