MAKE A STATEMENT
UP TO 40% OFF
STANDARD
Product Carousel Tabs
SMART LOADs FOR AUTOMOTIVE LED 2-way , 12 volt
Usually when replacing ordinary lamps in cars with LEDs, used for this purpose “LEDs load resistors” or as they are also called “Dummy resistor“.
But those solutions have several serious disadvantages such as – inability of the On-Board Computer to detect LED’s failure due to load resistor and the overheating of the load resistors.
Our company has developed an innovative intellectual module” that solved those problems!
DC-DC convertor and regulator
• Electronics DC-DC converter and regulator solves power supply problems for vehicles with high-demanding electrical consumers (up to 300A energy balance).
• The product has dual output of 24V and 12V.
• The product can supply output up to 300A at 24V.
• The product has small form-factor and is very light (0.5 kg)
• The product has a built-in microcontroller and an advanced circuitry to allow maximum efficiency and minimal heating.
Industrial Battery Monitoring Unit
Monitoring options: battery array up to 2000 AH and 6V to 48V.
BMU Technical Data:
Optional battery type: Acid Lead, Gel, AGM
Battery Voltage: 6V to 48V
Measuring (sampling rate) intervals: can vary from a few minutes to a few days
Device dimensions: 60X120X160 mm
Weight: 350 gr
Operating Temperature: -20°C to +80°C
BMU possible indications:
Battery state of charge.
Battery state of life.
Malfunction of battery charger.
Malfunction of battery connections.
Environmental issues indicators such as temperature and humidity.
Car battery tester
Comparative Advantages of BMU Device:
Bestsellers
Smartphones
-
led load resistor
SMART LOADs FOR AUTOMOTIVE LED 2-way , 12 volt
Usually when replacing ordinary lamps in cars with LEDs, used for this purpose “LEDs load resistors” or as they are also called “Dummy resistor“.
But those solutions have several serious disadvantages such as – inability of the On-Board Computer to detect LED’s failure due to load resistor and the overheating of the load resistors.
Our company has developed an innovative intellectual module” that solved those problems!SKU: SLM22112 -
DC-DC convertor and regulator
DC-DC convertor and regulator
• Electronics DC-DC converter and regulator solves power supply problems for vehicles with high-demanding electrical consumers (up to 300A energy balance).
• The product has dual output of 24V and 12V.
• The product can supply output up to 300A at 24V.
• The product has small form-factor and is very light (0.5 kg)
• The product has a built-in microcontroller and an advanced circuitry to allow maximum efficiency and minimal heating.SKU: 654613612 -
Industrial Battery Monitoring Unit
Telecom Battery Monitoring Unit
BMU Technical Data:
Optional battery type: Acid Lead, Gel, AGM
Battery Voltage: 6V to 48V
Measuring (sampling rate) intervals: can vary from a few minutes to a few days
Device dimensions: 60X120X160 mm
Weight: 350 g
Operating Temperature: -20cel to +80celSKU: bmu03 -
battery management system, Industrial Battery Monitoring Unit
Industrial Battery Monitoring Unit
Monitoring options: battery array up to 2000 AH and 6V to 48V.
BMU Technical Data:
Optional battery type: Acid Lead, Gel, AGM
Battery Voltage: 6V to 48V
Measuring (sampling rate) intervals: can vary from a few minutes to a few days
Device dimensions: 60X120X160 mm
Weight: 350 gr
Operating Temperature: -20°C to +80°CBMU possible indications:
Battery state of charge.
Battery state of life.
Malfunction of battery charger.
Malfunction of battery connections.
Environmental issues indicators such as temperature and humidity.SKU: BMU02
Laptops & Computers
-
led load resistor
SMART LOADs FOR AUTOMOTIVE LED 2-way , 12 volt
Usually when replacing ordinary lamps in cars with LEDs, used for this purpose “LEDs load resistors” or as they are also called “Dummy resistor“.
But those solutions have several serious disadvantages such as – inability of the On-Board Computer to detect LED’s failure due to load resistor and the overheating of the load resistors.
Our company has developed an innovative intellectual module” that solved those problems!SKU: SLM22112 -
DC-DC convertor and regulator
DC-DC convertor and regulator
• Electronics DC-DC converter and regulator solves power supply problems for vehicles with high-demanding electrical consumers (up to 300A energy balance).
• The product has dual output of 24V and 12V.
• The product can supply output up to 300A at 24V.
• The product has small form-factor and is very light (0.5 kg)
• The product has a built-in microcontroller and an advanced circuitry to allow maximum efficiency and minimal heating.SKU: 654613612 -
Industrial Battery Monitoring Unit
Telecom Battery Monitoring Unit
BMU Technical Data:
Optional battery type: Acid Lead, Gel, AGM
Battery Voltage: 6V to 48V
Measuring (sampling rate) intervals: can vary from a few minutes to a few days
Device dimensions: 60X120X160 mm
Weight: 350 g
Operating Temperature: -20cel to +80celSKU: bmu03 -
battery management system, Industrial Battery Monitoring Unit
Industrial Battery Monitoring Unit
Monitoring options: battery array up to 2000 AH and 6V to 48V.
BMU Technical Data:
Optional battery type: Acid Lead, Gel, AGM
Battery Voltage: 6V to 48V
Measuring (sampling rate) intervals: can vary from a few minutes to a few days
Device dimensions: 60X120X160 mm
Weight: 350 gr
Operating Temperature: -20°C to +80°CBMU possible indications:
Battery state of charge.
Battery state of life.
Malfunction of battery charger.
Malfunction of battery connections.
Environmental issues indicators such as temperature and humidity.SKU: BMU02
Laptops & Computers
Smartphones
SMART LOADs FOR AUTOMOTIVE LED 2-way , 12 volt
Usually when replacing ordinary lamps in cars with LEDs, used for this purpose “LEDs load resistors” or as they are also called “Dummy resistor“.
But those solutions have several serious disadvantages such as – inability of the On-Board Computer to detect LED’s failure due to load resistor and the overheating of the load resistors.
Our company has developed an innovative intellectual module” that solved those problems!
DC-DC convertor and regulator
• Electronics DC-DC converter and regulator solves power supply problems for vehicles with high-demanding electrical consumers (up to 300A energy balance).
• The product has dual output of 24V and 12V.
• The product can supply output up to 300A at 24V.
• The product has small form-factor and is very light (0.5 kg)
• The product has a built-in microcontroller and an advanced circuitry to allow maximum efficiency and minimal heating.
Telecom Battery Monitoring Unit
BMU Technical Data:
Optional battery type: Acid Lead, Gel, AGM
Battery Voltage: 6V to 48V
Measuring (sampling rate) intervals: can vary from a few minutes to a few days
Device dimensions: 60X120X160 mm
Weight: 350 g
Operating Temperature: -20cel to +80cel
Industrial Battery Monitoring Unit
Monitoring options: battery array up to 2000 AH and 6V to 48V.
BMU Technical Data:
Optional battery type: Acid Lead, Gel, AGM
Battery Voltage: 6V to 48V
Measuring (sampling rate) intervals: can vary from a few minutes to a few days
Device dimensions: 60X120X160 mm
Weight: 350 gr
Operating Temperature: -20°C to +80°C
BMU possible indications:
Battery state of charge.
Battery state of life.
Malfunction of battery charger.
Malfunction of battery connections.
Environmental issues indicators such as temperature and humidity.
Car battery tester
Comparative Advantages of BMU Device:
Low Voltage Disconnect (LVD) 24v – 10A
The Low Voltage Disconnect (LVD) module EL1024 monitor the battery voltage and automatically disconnects non critical loads when LVD senses that vehicle battery voltage is low or automatically reconnects when voltage is restored. The Low Voltage Disconnect device, that can be used to protect batteries from damage and help extend battery life.
Low Voltage Disconnect (LVD) 24v – 1A
The Low Voltage Disconnect (LVD) module EL0124 monitor the battery voltage and automatically disconnects non critical loads when LVD senses that vehicle battery voltage is low or automatically reconnects when voltage is restored. The Low Voltage Disconnect device, that can be used to protect batteries from damage and help extend battery life.
Low Voltage Disconnect (LVD) 12v – 10A
This battery guard will automatically disconnect any load and appliances connected through it when the battery voltage goes below a low voltage threshold, and it will also disconnect the appliances if the voltage is too high or the current exceeds 10A
Low Voltage Disconnect (LVD) 12v – 1A
This battery guard will automatically disconnect any load and appliances connected through it when the battery voltage goes below a low voltage threshold, and it will also disconnect the appliances if the voltage is too high or the current exceeds 1A
DC-DC UPS 12v
Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
SMART LOADs FOR AUTOMOTIVE LED 4-way , 12 volt
When incandescent light bulbs are replaced by LEDs in the headlights of the car, vehicle On-Board Computer generates error because that LEDs consume less power. Additional to this error, the frequency of the turn signal is increased. To correct operation of the On-Board Computer or to prevent incorrect work of relays, we have to simulate a load equal to incandescent bulbs. Usually used for this purpose “LEDs load resistors” and “Dummy resistors“.
But those solutions have several serious disadvantages such as – inability of the On-Board Computer to detect LED’s failure due to load resistor and the overheating of the load resistors.
Recently Viewed
SMART LOADs FOR AUTOMOTIVE LED 4-way , 12 volt
When incandescent light bulbs are replaced by LEDs in the headlights of the car, vehicle On-Board Computer generates error because that LEDs consume less power. Additional to this error, the frequency of the turn signal is increased. To correct operation of the On-Board Computer or to prevent incorrect work of relays, we have to simulate a load equal to incandescent bulbs. Usually used for this purpose “LEDs load resistors” and “Dummy resistors“.
But those solutions have several serious disadvantages such as – inability of the On-Board Computer to detect LED’s failure due to load resistor and the overheating of the load resistors.
Low Voltage Disconnect (LVD) 24v – 10A
The Low Voltage Disconnect (LVD) module EL1024 monitor the battery voltage and automatically disconnects non critical loads when LVD senses that vehicle battery voltage is low or automatically reconnects when voltage is restored. The Low Voltage Disconnect device, that can be used to protect batteries from damage and help extend battery life.
Low Voltage Disconnect (LVD) 24v – 1A
The Low Voltage Disconnect (LVD) module EL0124 monitor the battery voltage and automatically disconnects non critical loads when LVD senses that vehicle battery voltage is low or automatically reconnects when voltage is restored. The Low Voltage Disconnect device, that can be used to protect batteries from damage and help extend battery life.
Low Voltage Disconnect (LVD) 12v – 10A
This battery guard will automatically disconnect any load and appliances connected through it when the battery voltage goes below a low voltage threshold, and it will also disconnect the appliances if the voltage is too high or the current exceeds 10A
Low Voltage Disconnect (LVD) 12v – 1A
This battery guard will automatically disconnect any load and appliances connected through it when the battery voltage goes below a low voltage threshold, and it will also disconnect the appliances if the voltage is too high or the current exceeds 1A
DC-DC UPS 12v
Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
SMART LOADs FOR AUTOMOTIVE LED 2-way , 12 volt
Usually when replacing ordinary lamps in cars with LEDs, used for this purpose “LEDs load resistors” or as they are also called “Dummy resistor“.
But those solutions have several serious disadvantages such as – inability of the On-Board Computer to detect LED’s failure due to load resistor and the overheating of the load resistors.
Our company has developed an innovative intellectual module” that solved those problems!
DC-DC convertor and regulator
• Electronics DC-DC converter and regulator solves power supply problems for vehicles with high-demanding electrical consumers (up to 300A energy balance).
• The product has dual output of 24V and 12V.
• The product can supply output up to 300A at 24V.
• The product has small form-factor and is very light (0.5 kg)
• The product has a built-in microcontroller and an advanced circuitry to allow maximum efficiency and minimal heating.
Telecom Battery Monitoring Unit
BMU Technical Data:
Optional battery type: Acid Lead, Gel, AGM
Battery Voltage: 6V to 48V
Measuring (sampling rate) intervals: can vary from a few minutes to a few days
Device dimensions: 60X120X160 mm
Weight: 350 g
Operating Temperature: -20cel to +80cel
Industrial Battery Monitoring Unit
Monitoring options: battery array up to 2000 AH and 6V to 48V.
BMU Technical Data:
Optional battery type: Acid Lead, Gel, AGM
Battery Voltage: 6V to 48V
Measuring (sampling rate) intervals: can vary from a few minutes to a few days
Device dimensions: 60X120X160 mm
Weight: 350 gr
Operating Temperature: -20°C to +80°C
BMU possible indications:
Battery state of charge.
Battery state of life.
Malfunction of battery charger.
Malfunction of battery connections.
Environmental issues indicators such as temperature and humidity.
Car battery tester
Comparative Advantages of BMU Device: